Pianos consistently make movers annual list of items that are most regularly harmed. Grand pianos are specifically troublesome. Practicing the following treatments for taking apart, cushioning and packing grand pianos will prevent damage, lower claims expenditure, and improve consumer complete satisfaction.
1) At least three individuals are needed to manage an infant grand piano. If the child grand piano needs to increase or down stairs or if a complete or concert grand piano requires to be transferred, a minimum of 4 individuals are needed.
2) Always finish a precise and thorough inventory. It might be necessary or preferable to use a visual stock to effectively explain and reveal pre-existing damage.
3) As various parts are disassembled, please location all hardware in a properly labeled parts bag and then place the parts bag in a "Parts Box".
4) Remove the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a tidy furnishings pad.
5) Disconnect the cover by removing the hinge pins. Have someone wiggle the cover, holding it opposite the hinge, while a 2nd individual works the pin loose. Please beware not to harm the wood with the pliers or with the pin itself. Cover the jaws of the pliers with a little cloth to help avoid damage to the wood if essential. Wrap the cover in a clean furniture pad.
6) Remove the prop that holds the cover open and wrap it in a tidy furnishings pad. The prop has a hinge pin and is in 2 pieces.
7) Get rid of the pedal assembly and cover it in a clean furnishings pad. The braces at the rear of the assembly rest in slots at each end. When removing the screws, please take care not to drop the braces. In addition, please be particularly careful with the push-rods so that they will not get bent. As you face the piano, number the push-rods from left to right as "1", "2", and "3", by positioning a piece of masking tape with the appropriate number on each rod. Keep in mind: If masking tape is unavailable, please usage correctly labeled parts bags for this purpose. When reassembling at location, please be sure to put the rods in the proper order so that the pedals will work correctly.
8) Pad the piano by placing a clean rolled furniture pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to avoid it from tumbling open while you handle the piano. Cover the top of the piano with two clean furnishings pads, nicely folded around the keyboard. Use rubber bands to secure the pads. Note: Please guarantee that the surface area of the piano is dust-free prior to padding it. Padding an extremely sleek surface that is dusty might trigger great scratches, particularly on a black lacquer surface.
9) Position a piano board and connect the straps so that it is prepared to get the piano. The raised brace on the piano board must be at the keyboard end of the piano.
10) Get rid of the left front leg by positioning one individual beneath the piano at the left end of the keyboard. Be sure to have 2 people lifting the corner of the piano while the 3rd individual eliminates the leg. Note: Please be sure to keep in mind which legs were eliminated from which positions since some pianos have legs that are not interchangeable.
11) Place the piano on the piano board by lowering the "leg-less" end onto the board. Please be sure to lift the entire piano slightly while completing this maneuver to prevent undue pressure on the remaining, attached legs as the piano tips. Be sure that the piano is centered comfortably versus the brace at the end of the piano board.
12) Eliminate the two remaining legs and cover them in clean furniture pads. These legs are held in location by a "essential and slot" arrangement. To remove the leg, slide it inward towards the center of the piano till it comes out of the slot.
13) Secure the piano to the piano board by bringing the ends of the straps together and fastening them. Location folded burlap pads over the furnishings pads but under the straps to supply additional protection to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, tie the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface area, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, utilize the piano board as a skid. After adequately padding the stairs for protection versus residence damage, put the keyboard end of the piano toward the bottom of the stairs. Connect a bulge strap to the top end of the piano board to prevent the piano from slipping.
16) To pack the piano, leave it on the piano board and place it in a tier as hop over to this website the first base product with the keyboard facing the wall of the preceding tier. The finest location to load the cushioned cover is between the piano and the preceding tier or in between the piano and the wall.
Although grand pianos represent a significant difficulty, they can be moved without damage by utilizing sound judgment and practicing the procedures noted above.